Cast In Place Rigid Post Anchors

OSHA/ANSI-Compliant Cast In Place Anchorage Connections for Suspended Maintenance and Rooftop Fall Protection.

Or, give us a call: 1-888-936-0752

Casts directly onto new concrete roof slabs.

Safeguard’s Embedded Tieback Anchors are a safe, practical and permanent anchorage solution. Cost effective and proven, Tieback Anchors are used for fall protection and a wide range of suspended access applications, including window cleaning and exterior building maintenance. The Tieback anchor provides an ideal safety solution for rope descent systems where specific use and height restrictions apply and workers are operating suspended power platforms and temporary rigging equipment, or anywhere leading edge hazards exist.

Suitable for all flat roofs as fall arrest anchors for securing workers’ lifelines, suspension of boatswain chair or the tying back of temporary suspended access equipment such as outrigger beams. Casts directly onto new concrete roof slabs of minimum grade 3000 psi and thickness 7″. Maintenance free with periodic inspections as part of on-going use.

Specifications & Standards

  • CAN/CSA-Z91-02: Health & Safety Code for Suspended Equipment Operations
  • CAN/CSA-Z271-98: Safety Code for Suspended Elevating Platforms
  • CAN/CSA-Z259-M1979: Fall Arresting Devices, Personnel Lowering Devices and Lifelines.

Product Highlights

  • Designed to resist up to 24kN (5400 lbf) in any direction without fracture and/or pullout.
  • 11.1kN (2500lbf) without any deformation of any component of the system.
  • Features SSI Forged D-Ring
  • HSS cavity filled with polyurethane insulation
  • High-strength threaded rods and hardware
  • Hot-dipped galvanized steel exterior
  • Comes with custom spun aluminum flashing & EPDM grommet seal.

Need to Know More?

Download the Tie-Back Anchors Brochure or Spec Sheet

Find Out More About Tie-Back Anchors

  • This field is for validation purposes and should be left unchanged.

Providing Fall Protection for International Brands