Clamp On Beam Rigid Post Anchor

Clamps directly onto new or existing structural steel using patented and proprietary BeamClamp steel-to-steel connectors.

Or, give us a call: 1-888-936-0752

Intalls onto steel beams without needing access to the underside.

Safeguard’s Clamp On Rigid Tieback Anchors are a safe, practical and permanent anchorage solution. Clamped directly onto new or existing structural steel using patented/proprietary BeamClamp® steel to steel fixing solution. Clamp On Tieback Anchors can be installed without having to reach the underside of the roof. Best suited to retrofit but can be used in new builds.

Cost effective and proven, these anchors are used for fall protection and a wide range of suspended access applications including window cleaning and exterior building maintenance. Tieback anchor provide an ideal safety solution for rope descent systems where specific use and height restrictions apply and workers are operating suspended power platforms and temporary rigging equipment, or anywhere leading edge hazards exist.

Suitable for all flat roofs as fall arrest anchors for securing worker lifelines, suspension of boatswain chair or the tying back of temporary suspended access equipment such as outrigger beams.

Features & Benefits

• BeamClamp® options available for either tapered (BT clamps) or parallel flanges (BA clamps)
• Adjustable, if the steel is not in the correct position it can be adjusted easily
• Guaranteed Factor of Safety without the need for nondestructive testing
• Maintenance-free with periodic inspections as part of on-going use
• No hot work permits required

Specifications & Standards

  • CAN/CSA-Z91-02: Health & Safety Code for Suspended Equipment Operations
  • CAN/CSA-Z271-98: Safety Code for Suspended Elevating Platforms
  • CAN/CSA-Z259-M1979: Fall Arresting Devices, Personnel Lowering Devices and Lifelines.

Product Highlights

  • Designed to resist up to 24kN (5400 lbf) in any direction without fracture and/or pullout.
  • 11.1kN (2500lbf) without any deformation of any component of the system.
  • Features SSI Forged D-Ring
  • Hot-dipped galvanized steel exterior
  • Comes with custom spun aluminum flashing & EPDM grommet seal.

Need to Know More?

Download the Tie-Back Anchors Brochure or Spec Sheet

Find Out More About Tie-Back Anchors

  • This field is for validation purposes and should be left unchanged.

Providing Fall Protection for International Brands