Published on: 11/11/2025
You just moved into your new home, and it’s going great. You get a visit from the village welcoming committee, housewarming gifts from friends and relatives, and a one-month delay before making your first mortgage payment.
And then you come home one day and see that the building inspector paid a visit. Your hedgerow is 37 inches high, but the maximum allowed height is 36 inches. A small potted plant on the walkway to the front door is considered a trip hazard. The previous owner left a “Beware of Dog” sign on the fence gate. You don’t own a pooch, but now you are cited for having an unlicensed dog.
These all seem silly (and exaggerated). Although building inspectors sometimes go too far, they spend much of their time making sure that any plumbing, electrical, and structural work on your property is safe and compliant. They perform a valuable service that protects homeowners and their major investment—even their lives.
Building and business owners and facility and safety managers make significant investments in lifesaving engineered fall protection systems—horizontal lifelines, rigid rails, davits, and vertical climb systems—critical assets designed as the last line of defense against catastrophic falls.
They, too, should welcome a professional inspection because even the most robust safety equipment is not immune to the passage of time. Bolts can loosen, cables may fatigue, and minor damage or misuse can hamper effectiveness. A system that is not proactively maintained and inspected ceases to be an asset and becomes a massive liability.
Safeguard Industries offers comprehensive Inspection and Recertification Services to ensure that your equipment remains as compliant and effective year after year as it was on Day One of installation. A legally required annual inspection by a qualified specialist is an insurance policy that protects your workers and your investment in a robust fall protection plan.

Beyond Best Practices: Specific OSHA and ANSI Requirements for Inspection
A common and dangerous oversight is confusing the visual pre-use check conducted by the employee with a comprehensive, in-depth inspection required by code for the installed system itself. To clarify the standards:
Pre-use Worker Inspections:
OSHA 1910.140(c)(18) General Industry Standard
OSHA 1926.502(d)(21) Construction Standard
Personal fall protection/fall arrest systems must be inspected before each use for wear, damage, and other deterioration. Defective components must be removed from service.
Comprehensive Inspection of Engineered Systems:
OSHA 1910.140(c)(19) General Industry Standard
OSHA 1926.502(d)(15) Construction Standard
Ropes, belts, lanyards, and harnesses used for personal fall protection must be compatible with all connectors used. Anchorages used for attachment of personal fall arrest equipment shall be independent of any anchorage being used to support or suspend platforms and capable of supporting at least 5,000 pounds (22.2 kN) per employee attached—or designed, installed, and used as part of a complete personal fall arrest system which maintains a safety factor of at least two and under the supervision of an “OSHA Qualified Person.”
Verifying the connections and structural integrity requires a comprehensive inspection by an expert.
OSHA & ANSI Safety Solidarity:
ANSI Z359.7-2019 is a national consensus standard that recommends or mandates that permanent fall protection systems be inspected at least annually by an OSHA Competent Person (1926.32(f)) or an OSHA Qualified Person (1926.32(m)) – someone trained and authorized by the manufacturer or a registered professional engineer. Furthermore, an immediate inspection is required after any fall arrest event or major structural modification.
Non-compliance with these standards carries severe financial and legal penalties, but the true cost of failure is immeasurable: a serious injury or fatality.

The Safeguard Turnkey Advantage: Expertise from Design to Recertification
When maintaining compliant fall protection systems, choosing the right provider is as critical as the inspection itself. Safeguard Industries delivers a turnkey advantage that goes far beyond a simple checklist.
Certified Competence – Our inspections are performed by Competent Person/certified Field Service Technicians (FSTs) with deep knowledge of system design, engineering principles, and manufacturer specifications.
Holistic Safety Partner – We look beyond just fall arrest to provide complete site safety. Our FSTs are trained to identify and address a wide spectrum of hazards, encompassing passive safety (like guardrails) and custom access needs.
Protected Investment & In-House Capabilities
- Rigorous maintenance proactively identifies minor issues before they escalate into costly system replacements.
- Our unique in-house engineering and custom steel fabrication provide a distinct advantage for non-standard, complex, or immediate repairs. Systems are restored to original manufacturer specifications quickly and effectively.
Program Management – Dedicated Field Service Advisors remove the administrative hassle. They coordinate inspection schedules, necessary repairs, and recertification documentation.

The Service Mandate: Comprehensive Inspection and Recertification Scope
An effective inspection program is a rigorous, systematic process designed to leave no component unchecked. Annual inspection services from Safeguard go into great depth to assess the readiness and performance of your system.
- Full system verification and performance testing, including tensioning verification and bolt torque checks.
- Detailed inspection of all components: anchors, cables, posts, rails, trolleys, connections, fasteners, and the structural integrity of the supporting building elements.
- Minor maintenance, lubrication, and immediate recommendations for minor repairs or upgrades.
- Optional inspection of associated Personal Protective Equipment (PPE) used with the system (harnesses, lanyards, retractable lifelines).
Repair & Maintenance – When issues are found, we leverage in-house expertise to restore any system to its optimal, safe condition. We inspect and service all major engineered systems, including:
- Horizontal Lifelines
- Rigid Rail Track & Trolley Systems
- Vertical Lifeline & Climb Systems
- Rigid Tieback Anchors
- Davit Systems
- Guardrails
- Fixed Ladders
- Other Fall Protection Systems & Equipment
Value-added Training – System users can take advantage of available training by uniquely qualified staff to ensure full user competency on new or existing systems.

Compliance Requires Proof: The Safeguard Documentation Advantage
Is your inspection documented? (If not, then technically, it didn’t happen.) Compliance is only as good as the verifiable, available records. Following every service, Safeguard provides a complete Inspection Log and Certification Record:
- The date and location of the inspection.
- The technician’s name, certification, and signature.
- A detailed inventory of all systems and components inspected.
This documentation—kept current and readily available from Safeguard— is your first line of defense during an audit. In the event of an accident, it proves due diligence to the authorities and satisfies insurer requirements. This significantly reduces potential liability.
Protect Your People, Protect Your Investment: Book Your Inspection Today!
Your engineered fall protection system safeguards your workers and your business. It makes no sense to risk non-compliance, system failure, or the horrific cost of a fall. An annual inspection is not an expense; it is an investment in continuous safety and operational resilience.
Contact a Safeguard Industries fall protection specialist today to develop a proactive, managed onsite inspection program that guarantees compliance and meets your specific needs.