Rooftop Fall Protection Solutions

Anchorage connectors vary by industry, job, type of installation and structure. They must be able to hold fast under more than a ton of force generated in a fall. Safeguard Rigid Roof Anchors are designed to resist a pull-out force of 5400lbs (24kN), applied in ANY direction. Safeguard Rigid Roof Anchors are available with stainless steel or galvanized steel finishes. Weld-on, bolt-on, adhesive, cast-in-place concrete, curb and wall anchor models provide several options to choose from.

These versatile Horizontal Lifeline Systems are configured to provide reliable tieoff for worker restraint or fall arrest in either permanent or temporary solutions depending on the need. Systems are uniquely designed to provide hands free work on a variety of rooftops including membrane, standing seam, composite or green.

These products meet all applicable OSHA, ANSI and CSA standards for fall protection including EN 795 2012, CEN TS 16415:2013, ANSI Z359 & CSA Z259.

Safeguard’s permanent and temporary guardrail systems feature a modular design that takes the complexity and high cost out of roof edge protection for good. Systems integrate with existing ladders, equipment, and obstructions and provide durable OSHA and ANSI compliant fall protection for all standard rooftops including Membrane, Metal Profile, and Standing Seam up to 45°.

Fully tested and meets or exceeds current all applicable OSHA, ANSI and CSA standards for leading edge rooftop protection fall protection.

Kee Walk® Roof Walkway Systems provide a non-penetrating, safe, anti-slip walking surface. Systems can be used on flat, barrel and sloping roofs. Available with steps, longitudinal and traverse options allowing access to be created for virtually any roof configuration from 0 to 35 degrees. Step over designs are configured by our fall protection specialists using modular components and kits to provide a safe access solution over rooftop obstructions such as pipework, plant equipment and conduits.

Safeguard’s skylight fall protection systems, hatch kits and skylight railing solutions provide compliant protection to keep roof workers safe and help avoid accidental falls. Skylight & Hatch solutions are non-penetrating and are offered in galvanized and stainless steel versions. Railing systems are designed to fit oversized skylights of all shapes.

Fully tested and meets OSHA Standard 29 CFR 1926.501(b)(4), OSHA Standard 29 CFR 1910.28(b)(3)(i), Cal-OSHA Title 8, Chapter 4, Article 19, 1623(3).

ManSafe horizontal and inclined fall arrest and fall restraint systems incorporating the patented Constant Force post can be deployed across virtually all the major roof types including standing-seam, composite, built-up-on-site, secret-fix and membrane. Fixing the Constant Force post does not damage the integrity of the roof and therefore will not compromise the roof guarantee.

The RoofSafe™ range of roof safety systems has been developed to provide customers with a choice of solutions that enable them to most effectively resolve the risks associated with roof work and roof maintenance when working at height.