Safe Access and Fall Protection Solutions for Food and Beverage Production Facilities

Or, give us a call: 1-888-936-0752

The Occupational Safety and Health Administration (OSHA) has a “four feet rule,” mandating that general industry workplaces provide fall protection for employees working at elevations four feet or more. (OSHA 1910.28(b)(5))

Four feet may not seem that high, but on the retail side of the food and beverage industry, supermarket shelves typically reach above four feet, where falling products can be a calamity or an outright catastrophe.

On the large-scale protection side of the food and beverage industry, workers contend with many work-at-height challenges, including:

• Loading and unloading trailers or railcars at loading docks.
• Cleaning elevated conveyors, mixers, and packaging lines.
• Accessing mezzanines and elevated racks for inventory and materials handling.
• Performing inspections, maintenance, and repairs for building services equipment on the roof.

Consumers can get over “spilled milk” at a grocery store, but mishaps that could be disastrous or even tragic for workers should not happen at food and beverage production facilities. Fortunately, several OSHA-compliant barrier systems and other fall protection solutions are available to safeguard workers and bolster operational efficiency.

Stock up on guardrails.

Boxed guardrail kits offer a quick and easy way to protect workers throughout a food and beverage production plant. They are supplied with preassembled upright posts in corner, straight, and extension kits, each with two six-foot sections. Combinations of kits provide versatile layout options, and horizontal rails can be cut where shorter sections are needed.

The posts, horizontal rails, and connecting components can be either aluminum or galvanized steel for strength, durability, and corrosion resistance, making them ideal for indoor or outdoor use. The set screws in the component fittings are coated for corrosion protection, and the railing sets are powder-coated in “safety yellow.”

The kits are installed by tightening the set screws with a simple hex key. No welding or threading is required. Guardrail kits are designed to meet or exceed OSHA and International Building Code (IBC) standards.

Gateways to safety.

Self-closing Safety Gates integrate seamlessly into guardrail systems and round or square building surfaces. They feature a spring-loaded mechanism to close automatically once the worker passes through. Constructed of aluminum or galvanized steel, they are salt-spray tested to ASTM standards over 200 hours and to withstand more than 50,000 open/close cycles.

Gates are available in single width (39 inches), double width (two 35-inch sections), and full height (39 inches wide by 43 inches high). They can also be cut to size to fit facility needs. Safety gates are designed for stairs, ladders, elevated platforms, and channel access in a railing system along a safe pathway.

A Pivoting Pallet Gate provides safe access for workers loading and unloading pallets on mezzanines. It is available in four configurations and fits into a guardrail or other barrier system. A modular system constructed of aluminum or galvanized steel, pivot gates have no welded parts, so any damage caused by forklifts is easy to repair.

Top-shelf roof access solutions.

Even the largest food and beverage plants must optimize space within the facility for material handling, production, packaging, storage, and other operations and human resources needs. This typically leaves building services equipment—such as heating, ventilation, and air conditioning units—to be housed on the roof. Ladders and roof hatches are typical ways maintenance technicians attending these systems access the rooftop.

Roof Ladder Kits are guardrail systems flanking the ladder at the roof edge. A self-closing gate protects workers at the opening where the ladder reaches the roof. The aluminum or galvanized steel guardrails and gates are installed without welding and do not penetrate the roof. Ideally, the guardrails will be part of a roof perimeter safety railing system to provide OSHA-compliant fall protection.

Roof Hatch Kits surround the roof opening with an OSHA-compliant guardrail and safety gate system. The hatch kit includes a grab bar for easier and safer ingress and egress. More than 80 models are available to fit any manufacturer’s roof hatch or fire vent sizes. The aluminum or galvanized steel railings bolt directly to the hatch so they do not penetrate the roof.

Let the sunlight, not workers, fall through the skylights.

Skylights let in natural light, which can reduce the need for artificial lighting, thus lowering energy costs. Natural light is known to boost employee well-being, which contributes to morale and productivity. It can also eliminate shadows and dark areas to help workers identify defects or contaminants during food inspections.

However, OSHA considers skylights to be holes in the roof and a significant risk to workers. Skylight fall protection measures that provide OSHA-compliant worker safety but do not block the sunshine are necessary.

A Skylight Screen is a galvanized or stainless steel mesh that attaches to a skylight so that it does not obstruct natural light or penetrate the roof. Curb-style screens are available in sizes from 12-in. by 12-in. to 70-in. by 120-in. Custom sizes are also available.

A Skylight Dome surrounds the skylight with an aluminum or galvanized steel guardrail. Upright posts on the freestanding system clamp and lock into the base of the skylight without damaging the roof.

Mobile Rooftop Anchors

When it is impractical to install a guardrail system or for work requirements that are infrequent (no more than once a month) and temporary (no more than two hours), a counterweight mobile roof anchor provides an ideal interim fall protection solution. It is easy to assemble and disassemble for portable use.

The anchorage is designed for flat or low-sloped roofs and features rubber-coated base weights with suction cups for optimal non-slip friction. The four connected bases support a central pedestal with either a bracket for an engineered horizontal lifeline system or a tie-off point for a single user. Constructed of galvanized steel, the mobile anchor can be used in wet or dry conditions.

Take the next step for safety

Food and beverage production facilities present unique fall protection challenges. Guardrails, self-closing gates, safe roof access, skylight barriers, and mobile anchors provide OSHA-compliant fall protection to safeguard workers and boost their morale and productivity.

If you are responsible for worker safety at your food or beverage production plant, contact Safeguard Industries. Our services can include as little or as much as you need to comply with OSHA, from design and consultation, engineering, and fabrication to installation, training, and other support.